 Steering Mod - Whitby Motorcars SAI Mod Kit The kit contains: 2 new IFS brackets
2 Upper Control Arm Relocation Mounts
8 1/2" grade 8 bolts
8 1/2" flat washers
8 1/2" lock nuts
4 5/8-11 grade 8 bolts
4 5/8 flat washers
2 5/8 lock nuts
This kit is designed for use with SN-95 spindles and 17" wheels. If you have any questions regarding suitability for your application please inquire. If you are using the FFR complete kit with PBR dual piston calipers, or the same PBR dual piston calipers sourced elsewhere please tell us when ordering. You will need 2 M8 x 1.25 x 25mm Button head cap screws to replace your existing hex headed upper caliper mount bolts. Be sure to use loctite or equivalent on the threads. This is David Borden's own design. The SAI kit is designed to optimize the FFR front suspension geometry. This kit will give you better performance and steering feel on both the track and the street. It does this by bringing specific geometries inline with known standards. The kit lowers the Steering Axis Inclination from 18+ degress to approximately 9 degrees. This will reduce camber loss during turn-in increasing front end grip and reducing the need for negative static camber. In addition it will have a positive effect on steering feel. It lowers the roll center from approximately 5" to approximately 3.5" to better match the 3 link and IRS rear suspension options. This will increase front end grip and reduce jacking. It brings caster trail inline with standard one piece SLA spindles increasing steering linearity and reduce steering twitchiness at freeway speeds. Here is a link to the install instructions http://www.ffcobra.com/forums/showthread.php?t=44209&highlight=sai+instructions Thanks to David Borden, Dan Pellow and Richard Oben for all their work in making this kit possible. SAI Kit $299.00
Steering Mod - Forte's Parts Bump Steer Kit
Bump Steer kit for 87-93 or SN-95 Spindles
$125
 Description: OEM style sway bar. NO WELDING REQUIRED. Availible in 7/8 or 1" Part Number: ffr sway $159
 Halibrand Style Wheels
The NEW Halibrand style wheels from FFR are pretty nice and came free with my kit.
Here are the specifications:
Weight with adapter, spinner and lug cover
Here are some pics:
   Stainless Steal Side Pipes
The NEW SS side pipes from FFR are pretty nice too. It was a difficult decision between going with stainless steel or going with bare steel and have them ceramic coated by someone like http://www.jet-hot.com/ or http://htcracing.com/make/ford/jet%20hot.htm.Here are some pics:
   |
